Phoenix CP Radio Controlled Helicopter

Description : 
The phoenix CP is a fully functional remote control helicopter model with collective pitch control
The transmitter must have CCPM mixing capabilities
Easy to build, maintain and control
The phoenix CP is an remote control model for beginners as well as for experienced helicopter pilots
Main motors diameter: 530mm
Total weight: 300g
Body length: 528mm
Main blade: wooden
Power system: 370 motor
Control mode: CCPM system
Transmitter: six channel CCPM system
Power source: 11.1V 1250 MAH

Transmitter:
Product Description:6CH Radio Control System Channel: 6 Channel 
Frequency:35MHz/72MHz/36MHz
Charger port: Yes
Trainer port: Yes
Program type: PPM
Modulation: FM
3D switch: Yes
Static current: ?ܲ50mA
Power resource: 1.2V*8"AA" BATTERY
Voltage display type : LED
lower Voltage warning: Yes
Size: 180*190*60mm 
Weight: 560g
Certificate:CE,FCC 

Servos:
weight:8.4g
Torque:4.8V 1.5kg-cm
Speed:4.8V 0.12sec/60?㍊ Size(mm): 24x11x24
High performance servo which is made with a heavy duty servo case in our company has been instead of the
formel servo, with this high performance servo you can use it for helicopter, airplane glider and so on. 

3in1 controller: 
Include: Gyro,Mixer,Speed controller
Reset: Throttle Lowest
Weight: 12g
BEC: Yes
Size(mm): 42x22x13
3in1 controllers were desiged by Dynam exclusively for helicopter.mixing Gyro,mixer,speed controller.light weight,
small size, Stabilize function,be advantageous to flight. 

6 CH Receiver:
Type: FM
Channel: 6Channel 
Include BAT:1.5*2A*4cell
Demodulation type: frequency demodulation
Intermediate frequency:455KHZ
Frequency:72MHz/35MHz/36MHz
Weight:11g 
Dimensions:42*23*13mm 
Current Drain:13mA 
COLOR:Black
ANT Length:100cm 
Certificate:CE,FCC
This 6 Channel receiver is perfect for Collective Pitch flight. Very resistant to interference and works well with other electronics in close distance.